SX1 Stretch Blow Moulding Machine
For large containers
The SX1 is a high-performance, single-cavity linear blow molding machine designed for manufacturers who require precision and reliability for large-volume PET containers. It is the ideal solution for transitioning from traditional materials like polycarbonate or HDPE to recyclable PET.
Videos
Formats
Bottles and bulks containers from 3 to 20 lt.
KEG from 3 to 30 lt.
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products
SX1K Blow Moulding Machine
For large containers
The SIAPI SX1K has been specifically designed for the reliable, high‑precision production of large PET containers from 5L to 30L, using a two‑stage stretch‑blow moulding process. The system allows fast changeovers from one container type to another by simply replacing the mould, adjusting the blow rods, and recalling the dedicated production recipe—without any further mechanical adjustments. This ensures consistent quality, repeatability, and minimal downtime.
Videos
Formats
Bottles and bulks containers from 3 to 20 lt.
KEG from 3 to 30 lt.
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products
SX2 Blow Molding Machine
For high demand production large containers
The SX2 is a dual-cavity machine that doubles the production footprint of the SX1 without compromising on the structural integrity of the containers. It is designed for high-demand production lines where speed and consistency are paramount.
Videos
Formats
Bottles and bulks containers from 3 to 20 lt.
KEG from 20 to 40 lt.
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products
SXn Blow Moulding Machine
For high demand production large containers
The SX range of SIAPI machines includes the SX3, SX4 and SX5 models, designed to blow PET containers with capacities from 5 liters up to 30 liters (for the SX3 model). With the same features as the other models in the line, they ensure high reliability and efficiency.
Videos
Formats
Bottles and bulks containers from 5 to 20 lt.
KEG from 20 to 40 lt.
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products
SX1 Blow Molding Machine
For large containers
The SX1 is a high-performance, single-cavity linear blow molding machine designed for manufacturers who require precision and reliability for large-volume PET containers. It is the ideal solution for transitioning from traditional materials like polycarbonate or HDPE to recyclable PET.
Videos
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products
SX2 Blow Molding Machine
For large containers
The SX2 is a dual-cavity machine that doubles the production footprint of the SX1 without compromising on the structural integrity of the containers. It is designed for high-demand production lines where speed and consistency are paramount.
Videos
Benefits
- SIAPI has developed the PSB® system to optimize stretch ratio in the blowing process for large containers, improving material distribution and coupling with logos, textures and handles, maximizes the overall mechanical and thermal properties of containers and assures their perfect good looks.
- Wide bottles volume range with the same machine
- Over 25-years expertise in Linear Stretch Blow Molding Machines
- Prompt aftersales response with high skilled technicians
- High Efficiency and constant quality for bottles/containers blowing;
- Seamless interface with the rest of the filling line;
- Low maintenance cost
Key features
- Low Air consumption: thanks to the Air Recovery System that could limit compressor consumption up to 40%;
- The stretch unit is controlled by an electric brushless motor and PLC, allowing a dynamic control of rod movement and a perfect process also with non-standard stretch radios;
- Molds are all designed and built in our San Vendemiano facilities close cooperation with the customer;
- Machines are equipped with “AIR” (Advanced InfraRed) heating modules, this means: compact modules, high efficiency with immediate start-up time, low absorbed power, high MTBF (Mean Time Between Failures), affordable cost, and easy access and replacement.
- Super Grip technology for deep handle pockets (optional)
- External handle application (HandleMatic) and Deep Bottom technology for stackable shapes (optional)
Products
- Water
- Cooking Oil
- PET KEGs for beers
- Wine and soft drinks
- Chemical-industrial products