Keg cappers and decappers

[vc_row][vc_column][vc_column_text]

Overview

On the empty keg side of the line, a decapper can be installed to remove any possible cap still on the neck of the kegs returning from the market; on the full keg side of the line, cappers deposit a cap on each keg, in order to protect its valve from dirt and dust.

Upstream of the capping machine, the installation of a keg fitting disinfection system is recommended, so as to prevent any possible formation of molds underneath the cap, even under poor storage conditions. After the capping machine, a cap presence control device can be provided, to make sure all kegs have been properly capped.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3309″ img_size=”full”][/vc_column][vc_column width=”1/2″][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Advantages

  • Reliability in every possible line configuration
  • Easy and cost-effective maintenance
  • Quick change-over

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Products

  • Beer
  • Sparkling and still wine
  • Carbonated soft drinks

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]

Formats

  • Kegs

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_column_text]

Keg capper

[/vc_column_text][vc_single_image image=”3317″ img_size=”full”][/vc_column][vc_column width=”1/3″][vc_column_text]

Decapper

[/vc_column_text][vc_single_image image=”3309″ img_size=”full”][/vc_column][/vc_row]